1. Ipconfig /all For Macs
2. Run Ipconfig Windows 10
3. Ipconfig All For Mac

Public IP: 207.46.13.23: Organisation: Microsoft Azure Cloud (westus2) ISP: Microsoft Corporation: Country: United States: CountryCode: US: Region: WA. MAC address ipconfig command Click on the Start Menu. Type 'cmd' without quotes and press Enter. At the command prompt, type 'ipconfig /all' without quotes. (space between g and /) Alternatively, if using Windows XP, you can use the command 'getmac'. Your MAC Address is listed under.

Jump to: [ipconfig Commands] | [Ping Commands] | [Networking Commands]

A list of Windows DOS ipconfig commands and networking commands available from the Command Prompt in Windows. Such as ipconfig, ping, tracert and more. These command line tools are used to troubleshoot internet issues and local networking hangups. Please comment below if you have any questions.

ipconfig Commands

Display Full ipconfig Configuration:ipconfig /all

Release All IP Addresses:ipconfig /release

Renew All IP Addresses:ipconfig /renew

Display DNS Resolver Cache:ipconfig /displaydns

Clear DNS Resolver Cache:ipconfig /flushdns

Fresh Register DNS Connections:ipconfig /registerdns

Ping Commands

Ping IP Address:ping 127.0.0.1

Ping Website:ping stickystatic.com

Continuous Ping:ping -t 127.0.0.1

Ping X Amount of Times:ping -n 10 127.0.0.1

Ping A Sized Packet:ping -l 1500 127.0.0.1

Ping Timeout Limit:ping -w 5000 127.0.0.1

Resolve Host Name:ping -a 127.0.0.1

Networking Commands

Trace Route:tracert stickystatic.com

Get a sites IP:nslookup website.com

Displays all active TCP connections:netstat -a

Find your MAC Address:getmac

Display other devices on network:arp -a

Winsock Reset:netsh winsock reset

TCP/IP reset:netsh int ip reset resetlog.txt

The ipconfig command is used to find out your current local IP address, default gateway, TCP/IP settings and more. With IPCONFIG you can not only find out your IP Address, find your default gateway and find your subnet mask, you can release and renew, resolve the DNS, troubleshoot internet connections and more. This is a very handy network tool for finding your local IP address as well as many other secrets.

ipconfig cmd explained

ipconfig /all
To display all of your current IP information for all adapters. With ipconfig /all you can also find out your DNS Server and MAC Address. This will show your ethernet adapters full TCPIP configuration for all adapters on your Windows computer. You can find out your own IP Address as well as your default gateway.

ipconfig /release
Use IPCONFIG release to release your current IP information and obtain a new IP Address from the DHCP server.

ipconfig /renew
Use to IPCONFIG renew to renew your IP Address if you have it set to obtain IP Address automatically.

ipconfig /displaydns
This shows your current DNS resolver cache logs. DNS caching basically tells your computer to store the DNS locally. Meaning it now knows what website name is attached to what IP address and it can load faster using the DNS cache instead of having to resolve to it.

ipconfig /flushdns
The Flush DNS Command flushes or clears your current DNS resolver cache logs. If a website were to switch host or get a new IP address, yet still have an old DNS cache, it would direct you to a no longer working site. In this case, you would have to flush the DNS to obtain fresh information upon your next visit. This can happen if a website has a dynamic IP.

ipconfig /registerdns
The register DNS command updates the DNS settings on the Windows computer. It doesn’t just access the local DNS cache, it initiates communication with the DNS server and the DHCP server so it can re-register the network address. You can use this for troubleshooting problems with connection to the ISP (Internet Service Provider), like failing to obtain a dynamic IP address from the DHCP Server or failing to connect to the ISP DNS server.

If you ever wonder 'what your IP Address is' you would run an ipconfig as shown above. Note, this will only show you your local network private IP address and not your WAN address. If you need to find your IP address, default gateway(router login) or subnet mask, then ipconfig is the command prompt tool to use. These numbers can be very helpful when troubleshooting your internet connection. If you have changed your settings but they are not taking place you may try a ipconfig release and renew. If you’re having problems resolving to a website you may try flushing your DNS Resolver Logs.

ping cmd switches

In all of these examples “xxx.xxx.xxx.xxx” is an example of a Domain Name or an IP Address. You must fill those out yourself.

ping xxx.xxx.xxx.xxx
To Ping an IP Address you would type the following DOS Command in the Windows Command Prompt. Ping followed by an IP address. That is how you do an internet ping.

ping site.com (web address)
To ping a website you would type ping followed by the website domain name. If you know the websites IP Address you can ping it too.

ping xxx.xxx.xx.xx -t
Continuous Ping – It will keep on pinging forever until you hit Ctrl + C to stop it. This can be great for troubleshooting intermittent connections. Just open up a Command Prompt(or 3) and run the continuous ping command on a site like Google.com to see when you’re dropping packets. I would also run one on your router and on another site like site.com for a better data sample control group. What I mean by this, is if you’re pinging your website and losing packets yet not losing packets to Google, you know the problem is somewhere between you and your hosting company. If you are losing packets to your own router, the problem is with your local network. It could be the cat5 cable, your router or your hardware. You will have to do further troubleshooting to figure out where the problem is. To check if it is your router, do the same ping from another computer and if it is fine, it is your hardware or cable and not the router. You get the idea, use your head, be logical, troubleshoot.

ping xxx.xxx.xx.xx -n 10
Number of Pings – The N Switch is simply for setting the number of pings. By default the ping cmd sends out 4 packets at 32 bytes each.

ping xxx.xxx.xx.xx -l 1500
Size of Packet – By default the packets sent are a small 32 bytes. You can set your own size up to the max 65500 bytes. This can really help for stress testing your local network.

ping xxx.xxx.xx.xx -w 5000
Time Out – This is in milliseconds. The timeout by default is 4,000 milliseconds which amounts to 4 minutes. Just seeing if you were still paying attention. It really is only 4 seconds.

ping -a xxx.xxx.xx.xx
Resolves Hostname Address – This is a great one if you are helping someone else and need to find out what router model they are using. You an resolve the host of an IP Address with this command. Try pinging your router or your local computer with it. ping -a 127.0.0.1. Note that this switch will only work in front of the IP Address.

The Ping command is a network tool used to determine if you are able to send packets between your network computer on the internet to another computer without losing packets along the way. By doing this you can determine if you’re online or if a website is down. It also calculates round trip time and Time to Live. This can let you know if your NIC card is working properly and if you’re able to reach your router or modem. It is an invaluable command for troubleshooting internal network and external internet connections.

Basic Windows Network Tools

tracert site.com
With Trace route you can trace the path your packets take across the internet from you to your destination. Along the way you can determine the time from hop to hop. You can identify server problems and latency with this tool. It really helps see where the failure is between you and a destination. It may very well even be out of your hands.

nslookup site.com
nslookup xxx.xxx.xxx.xxx
nslookup is a way to get the IP address for a domain name. You can also do a reverse lookup from Domain Name to IP Address. It can be a way to find out if your DNS is properly working or if the site is having problems. You can obtain an IP from a site and try to visit the IP directly, bypassing the Domain Name Servers that would usually resolve the Domain name to IP name.

netstat
netstat can be used to view your active network connections and TCP/IP connections. You can determine what ports are open and being used, what programs are using your ports and what kind of TCP and UDP connections are present. Looking in here for the first time may scare the hell out of you.

netstat Switches
netstat -a Displays all active TCP connections. And TCP / UDP ports.
netstat -e Displays ethernet statistics.
netstat -b Displays all active programs that are listening.

Ipconfig /all For Macs

netsh winsock reset winsock reset
netsh int ip reset resetlog.txt TCP/IP reset
netsh is used to reset or rebuild the Windows TCP/IP IP Stack. This can be done if you have a problem with DNS. Say you are able to browse to a sites IP address but not to it’s Domain Name. You can find the sites IP by using nslookup mentioned above.
You may need to run this command as an administrator by right-clicking, run as admin for elevated permissions.

getmac
How do I find my MAC Address you might ask?
If you open up the command prompt you simply type getmac to get your computers local MAC address.

arp -a
To get the MAC address of your router or other devices on your local network, you may use the arp -a command. With this information, you can find out what type of router you are connected to by using this website. Simply plug in the MAC Address of your default gateway(found from IPCONFIG) and you can get the brand name of your router without looking at it. Pretty neat. Helpful in some situations.

How To Access Windows DOS Command Prompt

The best command prompt trick is how easy it is to access it. On Windows XP, Vista, Windows 7 or Windows 8 just press and hold the Windows Key + R on your keyboard. The other way to access the DOS Command prompt is to simply go to your Windows Start menu, Then go to Run. When the little box pops up you type in cmd. Once the Black Command Prompt pops up you can type any of these commands in and have some fun!

Mac OS X ipconfig

If you momentarily forget where you are at a Mac OS X terminal session, you might type 'ipconfig /all' or something equally Windowish. You will get a response:

usage: ipconfig <command> <args>>
where <command> is one of waitall, getifaddr, ifcount, getoption, getpacket, set, setverbose

What's this? You already know you mistyped: on Mac OS X you probably meant to run 'ifconfig -a' just as you would on Linux. But 'ipconfig' is different, and is actually something good to have in your bag of tricks.

The first thing ipconfig can do for you is quickly give you all your dhcp info:

$ ipconfig getpacket en0
op = BOOTREPLY
htype = 1
flags = 0
hlen = 6
hops = 0
xid = 1045997387
secs = 0
ciaddr = 0.0.0.0
yiaddr = 192.168.9.30
siaddr = 0.0.0.0
giaddr = 0.0.0.0
chaddr = 0:16:cb:8d:38:f7
sname =
file =
options:
Options count is 7
dhcp_message_type (uint8): ACK 0x5
subnet_mask (ip): 255.255.255.0
lease_time (uint32): 0x93a80
router (ip_mult): {192.168.9.254}
domain_name_server (ip_mult): {192.168.9.254}
server_identifier (ip): 192.168.9.254
end (none):

There are shortcuts to the items listed under 'options':

$ ipconfig getoption en0 router
192.168.9.254
$ ipconfig getoption en0 domain_name_server
192.168.9.254

'ipconfig getifaddr en0' is a quick way to just get the ip address.You can also use ipconfig with its 'set' options to change an interface from DHCP to manual or vice-versa. That's temporary; it doesn't write any start up files.

If you are having difficulty with DHCP, ipconfig has one more use: you can (as root) set verbose logging with 'ipconfig setverbose 1'. With that set, you get minor debugging info written to syslog (/var/log/system.log on my system), but you also get a separate BOOTP/DHCP log in /var/log/com.apple.IPConfiguration.bootp that shows the full BOOTREQUEST/BOOTREPLY packet negotiation.

Think of ipconfig the next time you are looking for DHCP info on a Mac.

Got something to add? Send me email.

Run Ipconfig Windows 10

Ipconfig All For Mac